How to root All Android phone using kingroot and others

, by Laura Ikeji

Root Tecno n7, n9, p9, m7, q1, d7, d1, s5, b3,
d9, m5, f5, m9 (A3), Z(A7), s7, g9, h6, h3 A(f7),
A+, A2(f8) , s3, h5, m3, p5, l3, f6, d3, d5,
ROOT Tecno P5, S3, S5, P9 (4.2), M7, D7 and
M3 (4.2) Q1, N7, D1, D5, M5 (4.2),
1. Download Framaroot 1.6 to your device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Boromir
5. You are rooted
ROOT Tecno F6, P6, H3, H6, L7, L6, P9(4.4),
M6, P5 Plus (4.4), M3 (4.4), Phantom Z (A7),
J7, Y6, Y3
1. Download Kingroot
2. Install the app on the phone
3. Ensure you have an internet connection on
the phone then launch the app
4. Wait for all checks to be complete
5. Click the center button (with Root and some
Chinese texts inscribed on it) to begin rooting
6. Wait for rooting to complete
7. You should see a green tick to confirm that
rooting was successful
How to root Tecno R7, H5, H7
1. Download Framaroot 1.9 to your device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Barahir
5. You are rooted
How to root Tecno M9 (A3) , F5
1. Download Vroot
2. Enable USB Debugging on the phone
(Settings > Developer OR Settings > About >
Keep clicking Build Number > Back to Settings
> Developer)
2b. Install PdaNet on the PC with phone
connected to PC via USB fellow instrution &
install the driver
3. Install Vroot on the PC
4. Launch Vroot and ensure you have an
internet connection
5. Ensure the phone is still connected to the PC
6. Wait for Vroot to detect the phone
7. Click the Root button to begin the rooting
8. The phone will be rebooted once rooting is
9. Done
How to root Tecno N3 and P3
1. Download POOT
2. Go to settings on the phone > Application:
check unknown source > tap preferred install
location> select internal device storage > tap
development > check USB debugging > Allow
mock locations Internet access on the phone.
3. Now you are ready for the main rooting. To
root your Tecno phone
4. Go to file explorer on your phone
5. Locate the poot application you downloaded
6. Click on it and install it to phone memory.
7. After installing open the installed poot
application from your menu icon
8. It will request to download ministro services
9. Download and install Ministro II library from
Google play store.
10. Now go back to open the poot application
11. It will ask to update QT libraries, do that
and your phone should restart automatically
12. If it doesn't, restart it yourself.
13. Now remove your memory card and boot the
phone without a memory card.
14. Immediately the phone gets to home-screen
quickly go tap on the poot application and tap
on 'press here to poot'
15. After the above step your phone should
shut down automatically (if it doesn't, restart
your phone and repeat from step 5).
16. After the phone goes off, it should come
back, but if it does not you have to remove the
battery and put it back, then start it.
17. Now again quickly tap on the poot aplication
immediately your phone gets to the home-
18. If every thing goes well then you should see
an option to download super user and root
16. If not try the steps again till you see
this two options.
17. Now download and install the super user
root checker from the link on poot.
18. Open up root checker and click verify to
the status of your phone.
19. You should see 'congratulation your phone
has root access'
20. If you get demon materialized while pooting,
simply restart and keep trying.
21. If you're still having issues with poot then
use Kingo Root
How to root Tecno D9, Phantom pad II (G9)
1. Download Root Master
2. Install it on the phone
3. Ensure you have an active internet
connection then launch it
4. Click the Root button
5. Give it a few seconds and your phone should
now be rooted
How to root tecno L3
To root your Tecno L3, you'll need:
1. A Computer and USB debugging enabled on
your L3
2. A USB cable to connect the Tecno L3 to the
3. Download SHUAME
4. Internet connection
Follow these steps carefully.
- After the download of shuame on your PC,
install it
- Connect your TECNO L3 and Launch SHUAME
allow the shuame load the phone name and
now click on what is circled in the picture
Note: if you see the red alert on the -~# Root it
simply means you have not been rooted and
that you can root the phone using the software.
if not either you have been rooted or you cant
your device with the software.
After few minutes you should get this screen
After rooting you should have
Congrats, your L3 is rooted
How to root Tecno Phantom A, A+ , A2, B3, N9,
S7, S9 and D3
* Download Eroot
* Download PdaNet
* Enable USB debugging on the phone (Settings
> Developer > Tick USB Debugging)
* Connect the phone to the PC then install
PdaNet, you should get a "Drivers successfully
installed" message at the end of installation
* Launch Eroot
* A root button will appear. If it doesn't, close
the PdaNet running from your system tray.
* Click on the root button and your phone will